| In the course of using the printer, prints often | | | | not-for-ink, do not. 210 ml, I'll leave it). If the ink |
| appear disconnected, no color, and so on. Such | | | | sac in the air as much, or the pipe into the air, the |
| problems, often caused by nozzle soft plug. | | | | implementation of the pumping operation ink sac, |
| General solution is clean, but how economical and | | | | it must kk2 the. |
| effective cleaning print head, slightly introduction | | | | 3, Intfill For ink process, the kk2 the below one |
| here. | | | | such option "intfill" This is a big washing thoroughly, |
| 1, panel a small cleaning In the large format printer | | | | the ink can completely exhaust pipes and pumping |
| operator panel, there is a dedicated button for | | | | the new ink into the nozzle. Therefore, he |
| cleaning, if Anzhe not release this button for 3 | | | | became the program for Mexico. Rarely used, but |
| seconds, then automatically the implementation of | | | | replacing the print head or for when the ink is |
| the washing machine. The cleaning ink | | | | very necessary. Because the new print in |
| consumption is very small, suitable for very small | | | | advance with a liquid, the protective role of the |
| block, usually one or two empty when compared | | | | print head. If you do not wash off easily with the |
| with the results. | | | | substitution reaction of ink, resulting in intermittent |
| 2, kk0, kk1, kk2 In Epson7600, 9600 maintenance | | | | plug. Red to 210 ml of ink each time, to your |
| mode, there kk series of cleaning, the specific | | | | hand that points ¥¥¥¥, caution ah. |
| operation method is: while "up" "down" "Enter" key | | | | 4, Power Cleaning This is a very important |
| does not release the three, and then press the | | | | cleaning, literally, power is the power of great |
| printer Power supply Button. Until the screen | | | | means, cleaning is the cleaning means and the |
| displays "test", then press the down button twice, | | | | cleaning up as much. But this distinction between |
| there "cleaning", press the right button, enter the | | | | inside. His efforts, while significant, but the |
| menu, there will be "Stdkk0", with up and down | | | | consumption of too little time due to the |
| buttons look, respectively, "stdkk1" " stdkk2 | | | | implementation of this cleaning, the printer ink |
| "from 0 to 2, is the different degrees of cleaning | | | | extraction efforts a relatively large, then there is |
| mode. kk0 minimum, kk2 maximum, kk1 center. | | | | his use, for some of the more stubborn of the |
| The three cleaning methods, the most commonly | | | | plug, you can consider the ( What is more |
| used is kk2, if the plug is a little bit stubborn, you | | | | stubborn? is n times with a panel of small cleaning |
| can consider kk2 to clean, generally able to solve. | | | | clear not open, you can use this up), his action is: |
| In fact, kk2 to do with the maximum not to | | | | after the normal boot, there paperout or ready, |
| wash the print head, it is generally used to print in | | | | press the right button once, press the up button |
| advance from pumping Ink So that the print head | | | | 2 second, the emergence of a MAIN ... ..., to find |
| ink infiltration. So, when you performed dismantling | | | | him after the press right button, enter the menu, |
| ink sac, or disassemble the print head over the | | | | there PWRCLEANING, he can implement, if not |
| operation, must be implemented kk2, so that the | | | | the ink in the ink sac less stubborn general block, |
| ink into the print head inside. (There is one, is intfill, | | | | can be resolved. |
| but too much consumption of ink, generally | | | | |